Unitized Curtainwall System (UCW)
Designed for peak building performance
This high performance system is available in SSG, 4sided and 2sided cap.
Key product features:
- Custom features available to meet any design intent requirements
- Designed for rapid production and install
- Created to fulfill “National Energy Code” standards
- Thermally efficient
Features
- Pressure equalized system
- Tailored to meet bespoke architectural requirements and design load requirements
Benefits
- Pre-glazed curtainwalls organized on a per floor basis
- Panels installed using mini-crane one or two floors above
| Air Infiltration: | ASTM E-283-04 |
| Structural Performance: | ASTM E330-14 |
| Static Water Penetration: | ASTM E331-00 |
| Dynamic Water Penetration: | AAMA 501.1-17 |
| Thermal Cycling and Condensation Resistance | AAMA-501.4-09 |
| Horizontal Displacement: | AAMA 501.4-09 |
Panel Testing Available: Contact CMC for Technical Information Sheets on testing.
*Tests Reports on MCM materials available through network of MCM manufacturers.
- Pressure equalized
- standard unitized system is a 68mm wide and 138mm deep.
- Provides overall thermal performance and reduces building energy cost for the life of the building.
- Rigorously tested and passed in Air Infiltration/exfiltration, water penetration, structural performance, inter-story horizontal movement, thermal cycling and condensation resistance, window washing tie back, 150% proof tested at 4.32 kPa (90.24 psf), and inter-story horizontal and vertical displacement.
Features
- Pressure equalized system
- Tailored to meet bespoke architectural requirements and design load requirements
Benefits
- Pre-glazed curtainwalls organized on a per floor basis
- Panels installed using mini-crane one or two floors above
| Air Infiltration: | ASTM E-283-04 |
| Structural Performance: | ASTM E330-14 |
| Static Water Penetration: | ASTM E331-00 |
| Dynamic Water Penetration: | AAMA 501.1-17 |
| Thermal Cycling and Condensation Resistance | AAMA-501.4-09 |
| Horizontal Displacement: | AAMA 501.4-09 |
Panel Testing Available: Contact CMC for Technical Information Sheets on testing.
*Tests Reports on MCM materials available through network of MCM manufacturers.
- Pressure equalized
- standard unitized system is a 68mm wide and 138mm deep.
- Provides overall thermal performance and reduces building energy cost for the life of the building.
- Rigorously tested and passed in Air Infiltration/exfiltration, water penetration, structural performance, inter-story horizontal movement, thermal cycling and condensation resistance, window washing tie back, 150% proof tested at 4.32 kPa (90.24 psf), and inter-story horizontal and vertical displacement.